Description

Gutter Magician of Northern Kentucky Inc

The Gutter Magician offers the Best Gutter protection System in Hyde Parkas a locally owned and operated family run business you can count on the professionals at the Gutter Magician to install a superior gutter protection system. Why not get out and enjoy with your family the wonderful shops and restaurants on and around Hyde Park Square in Cincinnati.

The 4 step gutter installation process | Gutter Magicians

Gutter is one of the most vital parts of any house. Lining up along the roof’s ledger, it helps disrupt the flow of rainwater down the roof right over the ground underneath. If gutters aren’t there, you need to face some serious problems. For instance, if gutters are not installed, you will always find a puddle forming right underneath the roof’s edge. Also, the ceiling and the top portion of the wall will start dampening, resulting in moldy growth.

So, it is important to get the right gutters in Florence KY installed at your home. If you are not aware about the process of gutter installation, then this following discussion will prove to be of great help since it will explain the four most important steps for installing the gutters at your home.

Cutting and rejoining the gutter systems

Since there are lots of curves and turns in your house roofs, you need to start the prep work by taking appropriate measurements. Each measurement should be accurate, with no marginal gap. Once done, use those measurements to cut the long gutter pipes into the required number of pieces according to the dimensions taken.

Use a sharp cutter to ensure that the cut surfaces are smooth and straight. It shouldn’t have any ups and downs since that will create gaps at the junction of two gutter units. Once you have cut all the pieces, rejoin the units using a waterproof sealant so that the rain water cannot damage the joints.

Mark all the points along the roof’s edge

Once you have prepared all the gutter Fort Thomas KY, you need to mark the points along the fascia. Start with the highest point at the fascia. This point needs to be present at a height of 1.25 inches below the fascia’s drip flashing area. If you do not follow this distance, water will spill out of the gutter and fall down the ledger.

As the roof always has a certain slope, calculate the factor till the downspout. You need to scale the gutter length as per the slope factor. This will tell you the points where the gutter pieces will start and end.

Attach and fix all the gutter hardware

Now, your next step will be to attach all the gutter Montgomery OH hardware units. You will have two options- using screws to fix the gutters to the fascia or using the fascia brackets for installing the pipes. The screws need to be placed at a distance of 2 feet from each other. While screwing the pipes directly on the fascia, ensure to use hanging straps for additional support. This way the gutters won’t come loose.

Install the downspout and elbow

The final step for gutter installation in Florence KY is to attach the elbow or the curved pipe portion with the gutter pipes. Once done, attach the downspout. Ensure that the opening of the downspout at the lower end is right over the drain. If you do not have any drainage opening, install the downspout under the surface.

Choose Gutter Magicians to bring finesse in gutter installation

For proper Gutter Installation Anderson Township Oh, you can hire Gutter Magicians so that no compromise can be done with this vital part of the house. We promise you that our installation services will be of the top notch quality so that you can relax at your home, while the gutters handle all other work.

Gallery

Ratings

  91% of people would recommend it to a friend